How to Fix Digital Scale Drift | 9 Easy Steps (2023) (2023)

You may have noticed that your digital scale has slowly drifted over time. This can be a frustrating problem, but luckily there are a few ways to correct it. In this blog post, we’ll discuss some of the causes of digital scale drift and show you how to fix digital scale drift. Stay tuned for more tips on how to get the most accurate measurements from your digital scale!

How to Fix Digital Scale Drift | 9 Easy Steps (2023) (1)

Summary: Digital scale drift occurs when the scale gives inaccurate readings. To fix this, you must first determine the source of the issue. Clean the scale’s sensors, replace the batteries and test to see if it is working properly. If not, calibrate the scale or contact the manufacturer for further assistance.

What Is a Digital Scale Drift

A digital scale drift is when a digital scale gradually loses accuracy over time. This can happen for several reasons, such as dust accumulation, temperature changes, or simply because the sensors in the scale start to wear out.

While a small amount of drift is to be expected with any digital scale, it can become a problem if it affects the accuracy of your measurements. However, there are a few ways to deal with scale drift, such as recalibrating the scale regularly or using a “drift compensation” feature (if available).

In any case, it’s important to be aware of the potential for drift to take steps to minimize its impact on your work.

Why It’s Important to Fix Digital Scale Drift

Losing weight is all about being precise and consistent. That’s why having an accurate digital scale is crucial. Even the slightest miscalculation can throw off your whole plan. Over time, all scales will drift out of calibration, but digital scales are particularly susceptible to this problem.

If your scale is off by even a few ounces, it can throw your entire weight loss plan off course. Fortunately, you can do a few simple things to fix digital scale drift.

To use a scale correctly, you should first make sure that it is level. An uneven surface can cause the scale to give inaccurate readings. Second, you should clean the scale regularly with a soft cloth or brush. Dirt and debris can build up on the sensors and cause the scale to give incorrect readings.

Finally, calibrate the scale according to the manufacturer’s instructions. This will ensure that the scale is giving you accurate readings. To convert from troy ounces to grams, multiply the number of troy ounces by 31.1 (the troy ounce is about 10% heavier than the “regular” ounce used in the United States).

By following these simple tips, you can keep your digital scale accurate and help ensure that your weight loss plan is on track.

(Video) How to repair weighing scale | Weight machine all setting process | Weighing scale circuit wiring

How to Fix Digital Scale Drift Step by Step Guide

Step 1: Gather Necessary Tools and Materials

To fix digital scale drift, you will need the following tools and materials:

  • Soft brush or cloth for cleaning
  • Calibration weights (compatible with your scale)
  • Flat, stable surface for calibration
  • Protective gloves and safety glasses
  • User manual for your digital scale

Step 2: Inspect the Scale for Damage or Debris

Inspect the digital scale for any visible damage or debris that could be causing the drift. This may include scratches or cracks on the weighing platform, dust or dirt buildup, or damage to the internal components. If you find any damage, address the issue accordingly or consult the manufacturer for assistance.

Step 3: Clean the Scale

Using a soft brush or cloth, gently clean the weighing platform and surrounding area to remove any dust, dirt, or debris that could interfere with the scale’s accuracy. Avoid using harsh chemicals or abrasive materials, as they may damage the scale.

Step 4: Position the Scale on a Flat, Stable Surface

Place the digital scale on a flat, stable surface to ensure accurate readings. Uneven or unstable surfaces can cause the scale to drift or give inaccurate results. If necessary, use a bubble level to confirm that the surface is level and make adjustments as needed.

Step 5: Initialize the Scale

Turn the digital scale on and allow it to initialize. Most scales will display a series of numbers or symbols during the initialization process. Consult the user manual for your specific scale to understand what the displayed symbols mean and ensure that the scale is functioning correctly.

Step 6: Tare the Scale

Once the scale has initialized, press the “tare” or “zero” button to reset the scale to zero. This will ensure that the scale starts at zero before calibration and will help to eliminate any drift.

Step 7: Calibrate the Scale Using Calibration Weights

Consult the user manual for your specific scale to determine the appropriate calibration procedure and the required calibration weights. Generally, the calibration process involves the following steps:

a. Press and hold the “calibrate” or “mode” button on the scale until the display shows “cal” or a similar message.

b. Place the required calibration weight on the weighing platform.

c. Wait for the scale to register the weight and display a confirmation message or return to the main weighing mode.

(Video) Broken OMRON BF508 digital scales - Can I fix it?

d. Remove the calibration weight and press the “tare” or “zero” button to reset the scale to zero.

Step 8: Test the Scale for Drift

After calibrating the scale, test it for drift by placing a known weight on the weighing platform and observing the displayed weight. If the scale is still experiencing drift, repeat the calibration process. If the issue persists, consult the manufacturer for assistance.

Step 9: Perform Regular Maintenance to Prevent Drift

To prevent digital scale drift, perform regular maintenance, such as:

  • Cleaning the scale regularly to remove dust, dirt, and debris.
  • Calibrating the scale periodically, as recommended by the manufacturer.
  • Storing the scale in a dry, temperature-controlled environment to prevent damage from humidity or temperature fluctuations.

By following these steps and using the appropriate tools and techniques, you can effectively fix digital scale drift and ensure accurate and consistent measurements. Regular maintenance and prompt attention to any issues will help extend the life of your digital scale and maintain its accuracy and reliability for years to come.

How to Fix Digital Scale Drift (Software Problem)

Step 1: Open the Start Menu

Open the “Start” menu and select “Control Panel.” Next, choose “Appearance and Personalization” and “Adjust Screen Resolution.” Next, find the “Advanced” settings tab and click on it.

How to Fix Digital Scale Drift | 9 Easy Steps (2023) (2)

Step 2: Find the “Digital Scale Drift Correction”

Find the “Digital Scale Drift Correction” setting. This is usually found under the “General” tab. Select it and click on the “Enable” button.

Step 3: Reboot Your Computer

Restart your computer for the changes to take effect. You may need to calibrate your digital scale again after this change. If the problem persists, contact the scale’s manufacturer for further assistance.

Digital scale drift can be frustrating, but it is often easily fixed. You can quickly and easily fix this issue by following the steps above.

Why Can’t the Manufacturer Fix Scale Drift

Scale drift is the gradual change in the size or position of an object on a screen. It is a very common problem with displays, and it can be extremely frustrating for users. Unfortunately, scale drift is often caused by hardware changes that are out of the manufacturer’s control.

For example, changes in temperature or humidity can cause the expansion or contraction of the display panel, which can lead to scale drift. Additionally, cleaning or replacing the display panel can also cause scale drift.

(Video) Best Digital Scales 2023 | Top 10 Digital Scales on Amazon

In some cases, it may even be caused by a simple software update. While the manufacturer may be able to provide a fix for scale drift, it is often not possible to eliminate the problem.

What Are the Best Practices for Scale Drift

Scale drift is the tendency for a scale to move off the original surface during weighing. This can happen due to several factors, such as static electricity, air currents, or even vibrations from passing traffic.

While it’s important to take measures to prevent scale drift, it’s also important to know how to deal with it if it does occur. The first step is to identify the source of the problem. For example, if the scale is located near a door or window, try to find a way to block the drafts. If vibrations are causing the drifting, try placing the scale on a sturdy surface.

Once you’ve identified the source of the problem, you can take steps to mitigate it. For example, you might use an anti-static spray on the scale before weighing. Or, if vibrations are an issue, you could try using a heavier weight on the scale to help keep it in place.

How to Fix Digital Scale Drift | 9 Easy Steps (2023) (3)

How to Monitor Scale Drift Changes

If you have a digital scale, you’re probably aware that they can be subject to drift over time. Drift is when the readings on your scale slowly become inaccurate. This can happen for several reasons, including changes in temperature or humidity or simply because the scale is getting old.

While it’s not usually a huge problem, drift can become an issue if you’re trying to weigh something precisely. Fortunately, you can do a few things to help mitigate drift and keep your scale accurate.

First, it’s important to monitor the changes in your scale’s readings over time. This can be done by weighing yourself or an object on the scale at regular intervals and recording the results.

If you notice that the readings are slowly becoming inaccurate, there are a few things you can try to fix the problem.

One possible cause of drift is temperature changes. If your scale is in a room that gets hot or cold, it can affect the accuracy of the readings. Try to keep your scale in a stable environment, away from any drafts or extreme temperatures.

Another possible cause of drift is humidity. If the air in your room is very dry or very humid, it can also affect your scale’s readings. So again, keep your scale in a stable environment with moderate humidity.

(Video) Top 5 Best Smart Scales 2023 Buying Guide [Best Body Composition Scale]🔥🔥🔥

How to Avoid Common Errors in Measuring

Measuring is an essential skill in many professions, from cooking and baking to carpentry and construction. Yet even the most experienced professionals can sometimes make mistakes when measuring ingredients or materials. To avoid common errors, it is important to consider when choosing and using measuring tools.

How to Fix Digital Scale Drift | 9 Easy Steps (2023) (4)

For example, when measuring liquids, be sure to use a marked container with measurements in fluid ounces or milliliters. In addition, use a spoon or other utensil designed for measuring rather than trying to estimate the amount with a regular kitchen spoon.

When measuring dry ingredients such as flour or sugar, use a level scoop or cup rather than packing the ingredient into the measuring tool. Finally, when using a ruler or tape measure, align the tool with the edge of the object being measured.

By taking care when measuring, you can avoid common errors and ensure that your ingredients or materials are correctly sized.

How a Manufacturer Could Handle the “problem” of Drift

The “problem” of product drift has plagued manufacturers for years. Therefore, it is important to understand what causes product drift and how it can be prevented to combat this issue effectively. Drift occurs when a product is applied outside the intended area, resulting in wasted product and potential damage to nearby surfaces.

The most common cause of drift is wind, blowing products off-target and into sensitive areas. To prevent this from happening, manufacturers must ensure that their products are properly applied.

This can include using low-drift nozzles on application equipment, incorporating windbreaks into the design of the application process, and providing clear instructions to users on how to apply the product correctly. By taking these measures, manufacturers can help to prevent product drift and keep their products on target.

Frequently Asked Question

How to Prevent It from Happening Again?

If your digital scale has drifted, you can do a few things to prevent it from happening again. First, make sure that the scale is placed on a level surface. Second, calibrate the scale regularly to ensure accuracy. Finally, contact the manufacturer for assistance if you notice the scale drift happening again.

Why Does My Scale Keep Jumping?

There are a few potential reasons your digital scale may be drifting or jumping. One reason may be that the scale is not level. First, make sure that your scale is sitting on a flat surface, and use a spirit level to check that it is horizontal. If it is not, try adjusting the feet of the scale until it is level.

How to Fix Digital Scale Drift | 9 Easy Steps (2023) (5)

How Do You Rebalance Scales?

If you have a digital scale drifting, you will need to rebalance the scales. This can be done by moving the weights on one side of the scale to the other side. But, again, make sure that you use an equal amount of weight on each side of the scale.

(Video) Neil Gershenfeld: Self-Replicating Robots and the Future of Fabrication | Lex Fridman Podcast #380


In conclusion, digital scale drift can be fixed by calibrating your scales regularly and checking the environment in which they are being used. If you follow these simple tips, your scales will provide accurate measurements every time. Have you had any issues with digital scale drift? Let us know in the comments below! Thanks for reading our post about how to fix digital scale drift.


How do I fix my digital scale not working? ›

When digital scales give inconsistent readings, it is often because the sensors are dirty. To clean the sensors, unplug the scale or remove the battery. Then, use a soft-bristled brush to remove any debris from the sensors. Once the sensors are clean, reconnect them to the power source and turn on the scale.

How do I fix scale error? ›

Remove old batteries from the back of the scale. Insert 4 new AA batteries. The scale manufacturer recommends using Duracell batteries. Wake the scale before weighing in again.

Why is my digital scale showing the wrong weight? ›

It's possible that a digital scale may give false readings if it's exposed to extreme heat or cold. The ideal temperature for these gadgets is around room temperature, so storing your scale in a chilly or humid environment may lead to problems.

How do you fix a scale that doesn't read weight? ›

Check and make sure the floor where the scale is being used is level. If scale is still reading incorrectly, it may be out of calibration. To double-check take a known weight and place it on the scale to see what it is reading. If the scale is not within tolerance, the scale may need to be calibrated.

How do I know if my digital scale is broken? ›

Warning Signs That You Need to Replace Your Scale
  1. Inconsistent Scale Readings:
  2. Inaccurate Readings Between Scales:
  3. Unstable Readings:
  4. Display Readability:
  5. Rust or Other Corrosive Damage:

Why is my body scale not working? ›

Make sure the metallic contacts of the battery compartment are touching the batteries and that they are not dirty or corroded. If they are, you can clean them with a cotton swab and some rubbing alcohol. Make sure the batteries work properly. You can try using new batteries to see if that's where the issue comes from.

Do I need to reset my scale? ›

#1 Every time a digital scale is moved it needs to be calibrated. Initializing the scale resets the internal parts allowing the scale to find the correct “zero” weight and ensure accurate readings. If the scale is moved and you do NOT calibrate it, you are likely to see fluctuations in your weight.

How do you unlock a digital scale? ›

Load the 4 AAA batteries into its compartment; make sure the + and – ends are facing correctly. Replace the battery cover and click it shut. THEN, unlock your scale by moving the switch position to unlock.

Can you recalibrate a digital scale? ›

Scale calibration is a process that ensures the instrument is providing accurate measurements. The calibration process for a digital scale involves placing a calibration weight on the platform while the scale is in a calibration mode.

What causes scale error? ›

It is believed that the error is caused by a disassociation between the part of the brain that controls the actual physical movement with the part that controls the planning of the action.

What can I use to calibrate my scale? ›

Using certified calibration weights, or test weights, is the most accurate method for calibrating a scale and should be your first choice. This is also the only Legal for Trade method you can use to calibrate your scales.

How do you calibrate a digital weighing? ›

Perform Cornerload Check: Place the weight in the center of the scale and re-zero the scale. Place the weight in the four locations (Front/Back, Left/Right) as indicated on the Calibration Sheet. Record the weight of each reading. For 12kg and 30kg weighing devices use verification weight of 5kg.

How to calibrate a digital scale without calibration weights? ›

Coins as Calibration Weights

Coins are minted to precise specifications, including weight, so they can serve as calibration weights. For example, a U.S. nickel weighs 5 grams. A penny weighs 2.5 grams. These numbers easily multiply, so 10 nickels can serve as a 50-gram calibration weight.

How long do digital scales last? ›

With proper care and maintenance, a high-quality digital scale can last anywhere from 5 to 10 years, while lower quality digital scales may only last 1 to 3 years. By following the tips mentioned above, you can prolong the lifespan of your digital scale and ensure accurate readings for years to come.

What can damage a digital scale? ›

If the scale is not regularly checked, condensation or moisture can build up on the load sensor or cables. This can affect electrical inputs and outputs to become coupled and cause interference in the signals being sent from the load cell to the display indicator.

Can low battery affect scales? ›

Low Battery Power Affects Accuracy

Low batteries and poor battery connections are the leading cause of scale malfunction and inaccurate readings when recording measurements on digital scales. For accurate measurements, it is essential that the scale's components receive the required amount of power.

Can a magnet ruin a scale? ›

In fact, weighing a magnet on an electronic balance may produce irreversible damage to the sensing device, and should be avoided.

Why is my weight not changing on scale? ›

A weight loss plateau may be explained by muscle gain, undigested food, and fluctuations in body water. If the scale doesn't budge, you might still be losing fat.

Can scales ever be wrong? ›

Bathroom scales are fickle devices. They can give you a different weight from day to day, or even moment to moment. Sure, the human body fluctuates over the course of the day and there are some crappy scales out there, but even relatively good scales can seem to be wildly inaccurate.

What does Lo mean on a scale? ›

"Lo" The "Lo" stands for low battery. If your scale displays this error, please replace the batteries inside the smart scale. Then turn the scale on, and wait until " 0.0" is displayed before measuring to calibrate.

What is the code for digital weighing scale? ›

HS Code 84233010 - Constant, weight, scales.

How do you change the mode on a digital scale? ›

For most digital scales, the instructions for changing the weighing mode are as follows:
  1. Power on the scale.
  2. Press the [UNIT] or [MODE] key to change weighing mode.
  3. Cycle through units by pressing the [UNIT] or [MODE] key until you find the correct weighing mode.
  4. Weigh items as usual.

What is the code for weighing machine? ›


How do you recalibrate a Digi scale? ›

Put 600 calibration weight on the platform. Wait until the internal code stays on a certain figure, press the MODE button, the screen shows weight of the standard weight then shows “PASS” and then 600g. Press ON/OFF button to switch off the scale. Calibration is completed.

What are the three sources of scale errors? ›

There are a variety of factors that can lead to measurement errors. Errors typically arise from three sources; natural errors, instrument errors, and human errors. Natural errors are caused by environmental conditions or significant changes in environmental conditions.

What are the two sources of error in weighing? ›

Inaccuracies in weighing systems can result from the loads themselves, as well as the way the load is applied and supported: Improperly aligned and twisting loads can cause the load cells to interpret the force as weight and output changes inaccurately.

What are scale errors examples? ›

Young children occasionally attempt to fit their body into extremely small objects. For example, they may attempt to wear very small shoes, as if they were putting on normal-sized shoes. This phenomenon is called “scale error” (DeLoache et al., 2004).

Can you use water to calibrate a scale? ›

If you are looking for something in your house to calibrate your scale that weighs within the range of 250 grams to 1000 grams, you can use a bottled water.

Is there a way to calibrate a digital scale? ›

6 Steps to Calibrate Your Scale
  1. Clean the Weighing Scale. It's important to keep your weighing scale clean and well-maintained to ensure accurate readings. ...
  2. Change the Batteries. ...
  3. Turn the Scale On a Few Minutes Before the Calibration. ...
  4. Position the Scale Properly. ...
  5. Place a “Known” Weight. ...
  6. Use the Calibrated Weighing Scale.
Aug 23, 2022

Why is my scale not changing but working out? ›

It's possible to gain muscle and reduce body fat without actually seeing a change in your weight. This happens when you lose body fat while gaining muscle. Your weight may stay the same, even as you lose inches, a sign that you're moving in the right direction.

Is it possible to calibrate a digital scale? ›

Scale calibration is a process that ensures the instrument is providing accurate measurements. The calibration process for a digital scale involves placing a calibration weight on the platform while the scale is in a calibration mode.

Do scales stop working over time? ›

Over time, scales can lose accuracy due to plain old wear and tear due to regular use and age. Scales must maintain their original balance for accuracy. Over time, however, they tend to lose this balance and they will require recalibration.

What is the best thing to use to calibrate a scale? ›

Using certified calibration weights, or test weights, is the most accurate method for calibrating a scale and should be your first choice. This is also the only Legal for Trade method you can use to calibrate your scales.

How do I make my scale accurate? ›

If you want your scale reading to be as accurate as possible, here are some tips to reduce measurement error.
  1. Ensure that the scale is level and on a hard surface.
  2. Allow your digital scale to self calibrate. ...
  3. Weigh yourself at the same time of day, preferably in the morning before eating or drinking anything.
May 1, 2019

Why does my scale give me a different weight every time I step on it? ›

This is really normal. It's all water weight - not fat or your scale.

Why is my scale not moving but losing inches? ›

If you're losing inches but maintaining your weight and you regularly strength train, you may actually be losing fat and gaining muscle. The process of gaining muscle and losing fat at the same time is called body recomposition. Most scales don't differentiate between the amounts of body fat and muscle you have.

How do you calibrate a digital scale without weights? ›

Coins are minted to precise specifications, including weight, so they can serve as calibration weights. For example, a U.S. nickel weighs 5 grams. A penny weighs 2.5 grams. These numbers easily multiply, so 10 nickels can serve as a 50-gram calibration weight.

Is it possible to calibrate a scale? ›

To calibrate a scale, the technician utilizes certified test weights to apply the recommended applied load amount to the scale, then ensures that the scale indicator displays the correct amount of weight. The key to proper scale calibration is having the correct tools for the job.

How long does it take to calibrate a digital scale? ›

It only takes a few minutes, and when done correctly, guarantees the measurements you are taking are accurate each and every time.


(Auto Repair Guys)
2. What's Neat This Week in Model Railroading #236 June 3rd 2023
(Ken Patterson)
3. hello card of weighing scale calibration|weighing scale calibration|weighing machine setting
(Vishnu solar system)
4. don't move!!!!!! #squidgame
(Still Watching Netflix)
5. How to replace the batteries on a bathroom scale easy
6. Convert Low-Res Graphic to High-Res in Photoshop! #Shorts


Top Articles
Latest Posts
Article information

Author: Stevie Stamm

Last Updated: 17/06/2023

Views: 5995

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Stevie Stamm

Birthday: 1996-06-22

Address: Apt. 419 4200 Sipes Estate, East Delmerview, WY 05617

Phone: +342332224300

Job: Future Advertising Analyst

Hobby: Leather crafting, Puzzles, Leather crafting, scrapbook, Urban exploration, Cabaret, Skateboarding

Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.